Yes I’m a genius in that aspect I could tell you what to do when you’re out of subscription 😅
on and off? what about the “No connection” problem?
Didn’t even need a paperclip.
sunglasses
Judging by my experience, router software probably has memory leaks so it eventually runs out of available memory and stops working properly.
This is more so if you’re using it for something that opens and closes a ton of connections, such as torrenting. In fact maybe 1 or 2 decades ago when those things had less memory the low and mid end quality routers couldn’t handle torrenting directly (so, when the router had to route each new connection, not behind a VPN were its the VPN-server that does it) without dying in a few hours.
Most slow or even no-connection problems I have get solved by restarting the router, though I have my own router and it’s a high-end consumer one (rather that using the one provided by the ISP), so nowadas that kind of problem happens maybe twice a year at most.
Consumer routers use neither ECC nor registered or buffered memory, so i guess it’s just the odd bit flip after weeks of running, in most cases.
On and then off you say?
It temporarily fixed the issues, but then they continued afterwards.
Actually turning the route ON and then OFF again would temporarilly solve a no-connection problem but then it would come back.
I don’t know how you interpreted @nailbar@sopuli.xyz’s comment, but you basically repeated it
I’ll always upvote Stargate
You rang?
can’t have connection issues if you have no connection
That’s why many cybersecurity professionals have their house no-tech or low-tech.
That’s why they turned it off at the end.
Sophisticated!
Bonus points if you had to bend a paperclip to push the reset button
I feel like — like myself — none of the technical users of Lemmy would actually like this. For me, my router is a mini PC running Alpine Linux and it’s likely the modem (which is also my own) is having problems with the physical cable connection but if I were using an all-in-one shit box from the ISP there would be no way of knowing.
All this to say, if restarting the router “fixes” things there’s likely a deeper, more unsettling problem happening that’s not being diagnosed.
Came here to say just this. ISP box goes into a Debian board with 10 gigE uplink to my actual switching. I asked if I could replace the XGPON-ONT by SFP+s but Alas the sales agent was rather confused and basically said “why?!”…
For me, it was openwrt bouncing the external interface during a DHCP renewal, even when the IP didn’t change. They still haven’t fixed that. I patch the stupid file every upgrade.
But yeah, at least I could fix it!
But yeah, at least I could fix it!
Isn’t openwrt open-source? If you fixed it on your machine, couldn’t you submit a PR to their codebase?
I’ve actually got the exact same issue - how did you end up fixing it?
This is the file:
/etc/hotplug.d/iface/20-firewall
In there, there’s a line that says
[ "$ACTION" = ifupdate -a -z "$IFUPDATE_ADDRESSES" -a -z "$IFUPDATE_DATA" ] && exit 0change it to
[ "$ACTION" = ifupdate -a -z "$IFUPDATE_ADDRESSES" ] && exit 0I pieced it together from this post, if it’s still around: https://github.com/openwrt/openwrt/issues/10338
All this to say, if restarting the router “fixes” things there’s likely a deeper, more unsettling problem happening that’s not being diagnosed.
Odds are it’s just some memory leak.
Having to reboot every 2-3 month isn’t too far fetched for these ISP modem/router.
