It’s going to be a total re-install, so that depends on what kind of setups you have. Not really different than switching to/from another distro.

Bazzite ships with KDE, so you could likely copy your themes and customizations for that pretty easily.

Bazzite is fedora based, and doesn’t use apt, but you can use distrobox like I mentioned in my post to get familiar ubuntu packages, if there are things that you need to be not flatpaks. You also can probably copy config files from non-flatpak apps into the flatpaks for most apps. I did this with my Cura configs. It may depend on the application.

Basically, I just backed up my user folder (~/) and pulled any configs out of there. You could just back up ~/.config and ~/.local but with ubuntu there are likely some things in a snap directory and such. Mainly ~/.config and ~/.local, but some applications may use other directories, like snap, etc.

I have an older nvidia card (1070) and had more of an issue than that getting the correct version of the driver installed for my card, and getting it to use the correct driver instead of the open source one that didn’t work well. It’s also possible I was doing something wrong. But yeah, it’s definitely doable, and it’s not too bad, but it’s fiddly compared to the ubuntu driver gui or something like bazzite that works out of the box with it.

Yeah, I probably wouldn’t buy a new laptop for a server, but it’s a great way to re-use what would otherwise be e-waste. I have a 20 year old laptop running as a server, currently just for FoundryVTT, but it works great. 4GB of DDR2 ram, Intel celeron dual core cpu. I stuck a new ssd in it (old hdd died) and it works great, as long as I don’t run any graphical interfaces while I have the server running. One ram stick was bad, but DDR2 cost me about $11. Total hardware cost was around $50 USD.

Thinking about just removing the lid entirely, since I don’t use it graphically (I can hook up a monitor if absolutely needed).

I have used gnome, plasma, and xfce and they are all fine. I prefer KDE personally but they’re all going to do what you need to do. It’s all down to personal aesthetic preference, and picking one won’t hinder you in any real way. KDE to me just looks super nice out of the box for my taste, and I like the customization.

I love Debian. Been using it on my laptop for over a year. Some specific drivers are a little fiddly if you have nvidia graphics but it’s not too bad, lots of good info on the debian wiki.

I miss the old tts voices and now everything is ai generated garbage :( Bring back the robot voices!

That’s why we use JavaScript on the front end, JavaScript on the back end, and you can streamline it even more by using JavaScript for the db layer too. After all, if you have too much data to be reasonably parsed in a single .json file, you are probably just architecting wrong.

Yeah absolutely. It’s a very different experience. I was just pointing out that they are other different reasons to prefer not to do residential service calls that don’t apply to retail. There are a lot of extra steps for retail but it’s all an established process. The guys I talk to that have done service call work all have absolutely insane stories.

I’ve talked with people in HVAC who have said the same. It’s much easier to provide a service to a business than random individuals.

However, this is different, as this is just a retail product. Micron doesn’t have to deal with the person who doesn’t pay after the job is done, or doesn’t lock their dog up because “he doesn’t bite, it will be fine” and it turns out to be an aggressive monster. This is just assembly line production that they already are set up to do.

I get that they have a limited number of inputs and they are just choosing to make as much money as possible. It sucks to see that go, though. Crucial has always been my go-to for RAM.

And then power toys shortcuts conflict with the standard shortcuts and requires a ton of fiddling and customizing configs. You know, the thing windows users always say is a reason they don’t want to use linux.

That should also come up in a reviews also. Not trying to imply one guy should get fired as a scapegoat, just talking from experience how much it sucks to know your code caused major issues.

So the actual outage comes down to pre-allocating memory, but not actually having error handling to gracefully fail if that limit is or will be exceeded… Bad day for whoever shows up on the git blame for that function

It does look very chonky, and not very aesthetically pleasing.

However, as a heavy user of the steam deck over the past year, I am super excited. The track pads and the extra inputs on the steam deck give so much flexibility to play games that otherwise wouldn’t work well with controller at all. I’m just hoping it feels better (or at least not worse) than the steam deck in terms of ergonomics. I plan on getting one for my desktop PC.

I’ve seen some people say they got fusion 360 working on linux with bottles, but I didn’t have any luck with it. I use OpenSCAD and FreeCAD for making models to print, but if you need Fusion360 specifically for work (or specific Adobe products) then you are kind of stuck unless your company is ok with a change. You won’t be able to view or edit other people’s Fusion360 files without that specific application. You can always run Windows in a VM on linux and install only the applications you need it for there. If you have a good enough PC that is viable, but isn’t a great experience on a lower end system.

Do you use vim motions in your JetBrains IDE? We use Webstorm at work and I installed the vim motions plugin because I want to get more fluent with using Vim but I haven’t really given it a fair shot yet.

It’s always something 😅

That sounds really frustrating. When my 1070 croaks I’m going with an AMD. Probably not going to upgrade before then since I mostly play older games and GPUs are just too expensive these days. First it was crypto mining, now it’s AI… I just want to play my single player RPGs!

That sucks. I have definitely had issues with certain hardware on other machines. Even with this Bazzite install, sleep doesn’t work (thanks to my Gigabyte MB, as the other poster mentioned) and I have some weird behavior with ethernet, but my asus wifi card is working fine, thankfully, and that didn’t work properly on windows when I tried it before I stopped dual booting.

Hopefully you can find something that works well with your setup. The most frustrating issues to debug are ones with support for some specific hardware that isn’t widely used by other Linux users, and may not ever be fully supported. Now that I am fully on linux, next time I upgrade I’m going to try to find components that are proven to work, and will probably be avoiding both Gigabyte and nVidia.

Huh, I may look into this. Sounds neat. Thanks!

I still had to wait for a long time for shaders to load on initial launch on some games (DA Veilguard) but performance seemed fine. I didn’t have performance issues on Ubuntu so not sure about your particular issues, but another thing to consider is based on your card, the latest nvidia drivers may not be correct - I had to download an older driver package for my card (1070) as recommended by nvidia. Bazzite had me select which series of card I had when downloading the ISO, so I assume it included the older drivers for my card. I haven’t actually checked the installed driver version though