I would probably add “transmit power” in there somewhere, but I guess if you’re assuming regulatory limits then it’s not a big variable.

Obviously you should use an exponential search, assuming you don’t know the age of the oldest human.

Not sure how serious your comment is, but I could certainly imagine Microsoft introducing new dependencies/hooks/all-executables-must-support-copilot, etc., that break compatibility faster than Wine can keep up. Glad to hear that’s not the case!

For old stuff though…yeah, I’d hope it’s not moving backwards :)

Torvalds uses it too I believe, so you’re in good company (Debian for me, though my heart belongs to Slackware).

VNC? You have your choice of servers, and clients are ubiquitous.

A big gotcha is that you need to be careful with encryption/security, as in classic UNIX style VNC does one thing (remote desktops). It’s easy to forward over ssh though.

You can also use VNC to share, which is not what you want; this depends on the type of server/settings. But you can definitely create a new virtual X11 session and access it remotely.

deleted by creator

200MWh is about 1/100 of Little Boy, the atomic bomb dropped on Hiroshima.

Compressed air can get out all at once given the right circumstances.

Storing energy in a way that can go boom is something I’d be a little scared of, were I a nearby resident. I’m sure thermal batteries can have gnarly failure mechanisms but I would way rather live near one of those than a giant compressed air cylinder.

Yeah, one of the issues I was having with running VPN on router is that you need a somewhat beefy router if you want to use your full bandwidth—my router maxes out at about 90Mbps with WireGuard, even though it can NAT around 1Gbps (which is our service).

I implemented two workarounds, one was to use my access point as a VPN router since it had a beefier CPU, and the other was to just use an ARM SBC with Linux to handle that task. (I ended up with the latter, as the former ended up maxing out at around 400Mbps, and introduced some additional headaches.)

I also have an SSID that doesn’t get VPN’d, though my DNS is always VPN’d.

As for accessing JellyFin, etc., I think we have somewhat different setups. My self hosted services are by default accessible without a VPN (SSID is on a VLAN with e.g. 192.168.0.0/24, servers are on 192.168.1.0/24, router routes between them). For the blanket VPN’d SSID I have a routing rule that routes over the main, not VPN, table, so local services can be accessed.

So: local traffic has a rule to route without VPN, reddit routes with a specific VPN, and general traffic routes with a different VPN.

There are lots of VLANs involved in my setup, and I’m sure it’s overly complicated and has gaping security issues, but it’s just a home network and it’s kinda fun :(

I have this set up on my router. My wifi is blanket tunneled through a VPN. For annoying sites that restrict access like reddit, my router routes through a specific VPN server that doesn’t (yet) get blocked (I don’t post/comment/browse, but occasionally find a post that answers a question). That way it works on my whole home network, regardless of device.

Same could be done for YouTube presumably, but maybe a little more complicated (reddit seems to work with a single /32 address).

Plus, it’s fun to set up—MikroTik router, Mullvad, and an ARM SBC doing the VPN duties for me, but myriad ways to get it working for other configurations.

deleted by creator

Per the Linux kernel coding style:

Tabs are 8 characters, and thus indentations are also 8 characters. There are heretic movements that try to make indentations 4 (or even 2!) characters deep, and that is akin to trying to define the value of PI to be 3.

Mac at work. Yabai+sketchybar is no i3wm replacement, but it works ok.

My .zshrc is basically the same as I use on my personal computers, and aside from a few coreutils differences it…kinda just works. I have apt aliased to brew so I can feel more at home.

Stock terminal works fine—I use xterm on Linux, so I’m used to relying on tmux for nice features anyway.

Basically, I miss the window manager, but practically speaking that’s a about it. (I obviously have xscreensaver installed!)

nc is useful. For example: if you have a disk image downloaded on computer A but want to write it to an SD card on computer B, you can run something like

user@B: nc -l 1234 | pv > /dev/$sdcard

And

user@A: nc B.local 1234 < /path/to/image.img

(I may have syntax messed up–also don’t transfer sensitive information this way!)

Similarly, no need to store a compressed file if you’re going to uncompress it as soon as you download it—just pipe wget or curl to tar or xz or whatever.

I once burnt a CD of a Linux ISO by wgeting directly to cdrecord. It was actually kinda useful because it was on a laptop that was running out of HD space. Luckily the University Internet was fast and the CD was successfully burnt :)

I’m a ~/tmp man myself.

Maybe not a service in the typical sense, but setting up your router+server to route your home network traffic through a VPN is a fun project.

My router (MikroTik) supports WireGuard, so I can use it with Mullvad for the whole house—but wg is demanding and it’s a slow router, so while it can NAT at ~1Gbps, it can’t do WireGuard at more than ~90Mbps. So, I set up WireGuard/Mullvad on a little SBC with a fast processor, and have my router use that instead. Using policy based routing and/or mangling, I can have different VLANs/subnets/individual hosts selectively routed through the VPN.

It’s a fun exercise, not sure I implemented it in a smart way, but it works :)

I would recommend PoE security cameras. You probably want support for RTSP / ONVIF.

I have some Amcrest cameras talking to Frigate. It is completely local—cameras on a separate VLAN that can’t talk to the Internet, footage is recorded on a server running Frigate. Works very well for me. No vendor lock-in is also nice!

640k 780k ought to be enough for anybody…

I know right? What a poser!

/s

I used Photoprism years ago, so my knowledge is probably pretty outdated.

My experience of Photoprism was that mobile was not tightly integrated. At the time I used Syncthing to sync photos — it worked ok for me, but I wasn’t going to set it up on my partner’s phone, for example.

Immich Just Works on both mobile and desktop. Multi user is great, sharing is great, and the local ML and face detection work remarkably well.

Whatever works for you is the best of course! Immich fits the bill for me, and it was very much worth it for me to “buy” it.